Notice: Modifiers (Reflectors, Softbox, Umbrella) are optional, not included.
This kit features 2 x AD200 Wistro strobe lights, 2x Godox S2 Bracket with Bowens mount, 2 x 260cm heavy duty and 1 x X2T trigger.
The AD200 is a 200W cordless Lithium-ion powered TTL and HSS enabled strobe with an in-built Godox 2.4GHz X-system radio receiver inside (currently for Canon, Nikon, Sony, Olympus and Fujifilm).
Being dedicated off camera flashes they feature no hotshoe and are a slimline monoblock unit. The AD200 provide a similar compact size of a speedlite though with some added power.
While also featuring an interchangeable flash head which provides the option of either bare bulb or traditional speedlite fresnel head.
The AD200 can be mounted via a 1/4″ threaded mounting hole on either side of the flash allowing landscape or portrait orientation when using the speedlite head.
AD200 Witstro 200W Cordless Portable TTL Strobe
The AD200 is a 200W cordless Lithium-ion powered TTL and HSS enabled strobe with an in-built Godox 2.4GHz X-system radio receiver inside (currently for Canon, Nikon, Olympus/Panasonic, Fuji and Sony). Being dedicated off camera flashes they feature no hotshoe and are a slimline monoblock unit. The AD200 provide a similar compact size of a speedlite with some added power.
Specifications
| Maximum Watt/Seconds | 200 |
| Compatibility | TTL with Canon, Nikon, Sony cameras with optional X1-C, X1-N, and X1-S transmitters TTL with Olympus/Panasonic, Fuji cameras with optional X1T-O and X1T-F transmitters |
| Control | Manually on unit Via X1 Transmitter Which Will Wirelessly Control: Flash Mode: TTL, Manual, Multi (Stroboscopic), power level Modeling lamp on/off, Beeper on/off First and second curtain sync, High Speed Sync |
| Guide Number | At Full Power: Speedlite Flash Head: 170.6' (52 m) ISO 100 @ 35 mm Bare Bulb Flash Head: 197' (60 m) ISO 100 with AD-S2 reflector @ 28 mm |
| Color Temperature | 5600K ( /-200K) |
| Recycle Time | 0.01 to 2.1 sec |
| Flash Duration | Speedlite Flash Head at t0.1: 1/220 to 1/13,000 sec Bare Bulb Flash Head at t0.1: 1/220 to 1/11,300 sec |
| Flash Variability | 8 Steps: 1/128 to 1/1 |
| Flash Delay | Yes, 0.01 to 30 sec |
| Flash Modes | TTL, Manual, Multi (Stroboscopic) Stroboscopic: up to 90 times (99 Hz) |
| Modeling Light | Uses Speedlite Head: Auto turn off after 30 minutes |
| Sync Mode | High-speed sync up to 1/8000 sec First curtain sync and second curtain sync |
| Flash Exposure Compensation | Yes, plus or minus 3 stops in 1/3 stop increments |
| Flash Ready Indicator | LED, beep Flash hibernates automatically after 30 minutes of non-use |
| Built-in Slave Cell | S1 and S2 optical slave modes 2.4 GHz radio system |
| Wireless & Radio Specifications | Function: Slave or Off Channels: 32 Groups: 5 (A, B, C, D, E) Range: 328' (100 m) |
| Mounting | 1/4"-20 female threads AD-E Holder (stand mount) |
| Fan Cooled | No |
| Replaceable Flashtube | Yes, in bare bulb head |
| Connectors | 3.5 mm sync input Wireless control port USB port |
| Battery | Lithium, 14.4 V / 2900 mAH Power remaining indicator |
| Number of Flashes @ Full Power | 500 |
| Dimensions | 6.6 x 3.0 x 2.0" (168 x 75 x 50 mm) without flash head |
| Weight |
19.7 oz (560 g) without flash head and battery |
Godox S2 Speedlite Flash Bracket For Bowens / S-Type Mounts
The Godox S2 Speedlite Flash Bracket for Bowens S-type mounts is superior: all-in-one, smaller size, portable design, no assembly/disassembly, and easy mounting system. Quickly add Bowens mount lighting accessories and modifiers to get creative lighting effects to your flashes.
Features
- No pre-assembly & post-disassembly. Smaller size, lighter weight, & less occupied space
- Unique speedlite mounting way: mounted horizontally or vertically by wrapping speedlite body
- Reliable mounting: not require Velcro, no pressure on hot-shoe, no metal scratches on speedlites
- Mount size is adjustable to fit all brands of speedlites and flashes, this includes the Godox TT350, V350, TT600, TT685, V860II, V1, AD100Pro, AD200, AD200Pro, AD300Pro and AD400Pro
- Bowens mount allows for mounting of most studio flash accessories, e.g. softbox, reflector, beauty dish, etc
- Umbrella input hole is available and adjusting lighting direction with handle is supported
Godox X2T TTL HSS Wireless Camera Flash Trigger
The Godox X2T is the second generation of the X1T trigger and has many new features. The form factor remained the same but it has been upgraded in many ways.
Updated from the X1T the X2T trigger has new user interface, dedicated group buttons, relocated control-wheel – This makes the X2T easier to use. It features the new hot shoe locking mechanism as seen in the Godox V1. The X2T has a new AF assist light that uses visible light instead of a red/infrared pattern (not compatible with mirrorless cameras) USB-C connection that is more up to date and more reliable than a microUSB
The long awaited Bluetooth connection has arrived. You can connect the X2T to your phone or tablet, so controlling your Godox strobes and flashes will be available from your device. The phone/tablet commands the X2T, the X2T commands the flashes. It is extremely useful when doing product photography in the studio while the radio trigger can be hard to reach on the top of the camera.
| Channels | 32 |
| Groups | 5 (A, B, C, D, E) |
| Wireless Range | 328.08' / 100 m |
| Radio Frequency | 2.4 GHz |
| Sync Speed | 1/256 Sec (Normal) 1/8000 Sec (High-Speed) |
| Ports | 1 x USB Type-C (Data) 1 x 3.5 mm (Flash) |
| Bottom Mount | Hot Foot (Locking) |
| Top Mount | Hot Shoe |
| Battery Type | 2 x AA |
| Dimensions | 2.83 x 2.76 x 2.28" / 72 x 70 x 58 mm |
| Weight | 3.17 oz / 90 g |
Hypop 260cm Heavy Duty Light Stand
The 260cm heavy duty light stand features a standard 5/8" spigot with a 1/4" thread on the end. It's compatible with most photography and video light fittings. You're able to mount brackets and other accessories directly to the stand. Mount Spectrum, Godox, Aputure, Jinbei, Hypop and many other light fittings directly to this sturdy light stand.
Features
- Section: 3
- Min. Height: (cm): 106
- Max. Height: (cm): 260
- Folded Height (cm): 91
- Max. Load: 4kg
- Poles: (mm): 29.5/26/22.4
- Leg: (mm): 22
- Locking Knob: aluminium
- Stud Adapter: 1/4" and 3/8"
(OPTIONAL) Godox 80cm Octagon Collapsible Softbox (Bowens)
is designed to diffuse any Bowens mount strobe flash, giving you softer, even lighting.
It features a silver reflective interior, a large 80cm / 31.5" size and a flush front face. It also includes an internal diffuser and features an easy to set-up collapsible frame. Finally, a detachable velcro grid is included to allow a more focused light for different creative lighting scenarios. Overall, this is an essential modifier for any professional portrait photographer.
(OPTIONAL) Hypop Standard Soft Diffuser Umbrella (40"/102cm)
softens, broadens, and diminishes the light output. White translucent Umbrellas are perfect for creating nice, soft light. Ideal for portrait photography. This umbrella is not only great as a "shoot-through" umbrella, but it can also be used as an inexpensive bounce light.
Upgrade to the
What's Included
2x Godox Witstro AD200 200W Wireless Portable Outdoor TTL Flash
2x AD200 WB29 Battery
2x AD200 Speedlite Flash Head
2x Bare Bulb Flash Head
2x AD200 200W Bare Bulb
2x Flash Bracket
2x Battery Charger and Cable
2x Godox Soft Carry Case
2x 260cm Heavy Duty Light Stands
2x Godox S2 Bracket (Bowens Mount)
1x Godox X2-T Trigger (Suitable for Canon, Nikon, Sony, Fujifilm, Olympus/Panasonic)
Optional: 2 x Hypop 40" Soft Diffuser Umbrella
Optional: 2 x Godox 80cm Octagon Bowens Collapsible Softbox
![Attwood PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - RealTree Max-4 Camo [14193-7]](https://www.portablehcfi.shop/image/attwood-paddlesport-portable-navigation-light-kit-screw-down-or-adhesive-pad-realtree-max-4-camo-14193-7_Y23SoZ_285x.webp "Attwood PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - RealTree Max-4 Camo [14193-7]")
